Mũi đo độ cứng cho các loại máy đo Vickers, Rockwell, Brinell
Sử dụng được cho máy đo của các thương hiệu khác như: Mitutoyo, Future tech...
Với giá cả phải chăng chất lượng đảm bảo, luôn có hàng tồn kho
   
With official calibration certificates UKAS, DKD or ASTM
 
   CV Instruments offers a wide range of indenters. All certified indenters
   will be issued with a certificate traceable to internationally recognised
   standards such as UKAS, DKD or ASTM. We also offer low cost factory
   certified indenters and specials (see below).
 
   Specials
   CV Instruments also offer special adapters for indenters to enlarge the
   field of application. Small gooseneck adapters are available in three sizes
   to permit regular or superficial Rockwell hardness testers to perform
   internal tests on rings, tubes and annular parts where the inside
   diameter, plus the wall thickness, is less than 50.8mm or 2 inches.
 
   These adapters will fit any of the standard Rockwell hardness testers.
   The gooseneck adapter can be clamped into the bottom of the plunger
   rod (in the same manner as an indenter) and is not heavy enough to
   affect a reading due to increasing the applied load. The minimum
   internal diameter which can be tested is 11.5mm or 7/16 inch.
 
   Ask for our separate product list of indenters.